22000m³/h 2.2kw industrial evaporative air cooler mounted on the window

The working principle of the air cooler: It uses the principle of water evaporation and heat absorption to cool down. It has been widely used in our daily life. When we stand on the beach, we feel very cool. When water is applied to the surface of the skin, it feels cool as soon as it blows. This is water evaporation. In the process of absorbing the heat in the air, the air temperature drops. The cooling principle of the air cooler is to use this natural phenomenon to combine high technology with direct evaporative refrigeration technology to develop a set of cooling, ventilation, energy saving and environmental protection. All-in-one air cooler. Air volume:22000m³/h Application area:120-200㎡/set Power:2.2KW Voltage:380V/220V/Customized Frequency:50Hz/60Hz Fan type:Axial Flow Fan Water consumption:25-30Kg/h Noise:80(dB) Outlet dimension(L*W):670X670mm Dimension( L*W*H):1080*1080*1150mm

1. Energy saving: at least 1 kw per hour, low operating cost, and only 1/8 of the power consumption of traditional compressors. 2. Environmental protection: no freon, no heat pollution, integrates deodorization, ventilation, ventilation and cooling. 3. The cooling effect is obvious: generally, the cooling effect can reach 4℃-12℃, and the cooling speed is fast. 4. Large coverage area: the coverage area of each air cooler is 80-300m², the air supply volume per hour is 18000--30000m³, and the air supply distance is long. 5. Less investment and high efficiency (80% investment in central air conditioning can be saved.) 6. The use site can not close the doors and windows to ensure air circulation and increase the oxygen content in the air. 7. Intelligent or manual sewage cleaning function: the sewage time can be freely set and run automatically.

Model	Air volume（m³/h）	Power （KW)	Voltage（V）	Outlet dimension (mm）	Application area （㎡）	Dimension ( LWH) （mm）
YNC-180	18000	1.1/1.5	380	670*670	80-120	10801080950
YNC-220	22000	2.2	380	670*670	100-150	118011801160
YNC-300	30000	3.0	380	800*800	150-200	130013001180

1. Installation environment When installing the air cooler, it needs to be installed in a relatively place nearby with relatively fresh air, such as the outer wall and the roof. Of course, it is not advisable to install it near the toilet and the kitchen. 2. Installation method The installation should be based on the location, select the appropriate size, determine the construction and installation of the pipeline, whether the link between the brackets is guaranteed, whether the pipeline will be blocked by obstacles, and whether the pipeline and hanger can be installed need to be considered. 3. Installation of exhaust port The operation of the air cooler is inhaling the outdoor air,then through the cooling pad, convey to the indoor continuously , and convecting the hot air and turbid air in the room to achieve ventilation and cooling. Therefore, the number of exhaust outlets needs to be configured in a certain scale. The inlet and outlet ports should be kept in a ratio of 1:1. If there are many heating devices in the workshop and there is no exhaust port, enough exhaust ports should be opened at a height of more than 3 meters, or other equipment should be used to extract indoor hot air, in order to achieve the ideal ventilation and cooling effect.

22000m³/h 2.2kw industrial evaporative air cooler mounted on the window

Products Details

Featured Products

Contact us